Product ID:FLEETWELD 5P (AWS E6010)
MSDS Date:01/15/1990
FSC:3439
NIIN:00-262-2669
MSDS Number: BJRMP

THE LINCOLN ELECTRIC CO

22801 ST CLAIR AVE
CLEVELAND, OH 44117-1199
US

Emergency Phone: 216-481-8100

Info Phone: 216-481-8100

Cage: HO076

THE LINCOLN ELECTRIC COMPANY

EUCLID, OH 44117-1199 US

Telephone: 216-481-8100

Cage: HO076

CELLULOSE AND OTHER CARBONYDRATES

CAS: 65996-61-4

Fraction By Weight: < 5%

OSHA PEL 5 MG/M3 RESP.DUST

ACGIH TLV: 10 MG/M3 NUISANCE

SODIUM SILICATE

CAS: 1344-09-8

Fraction By Weight: < 5%

OSHA PEL 5 MG/M3 RESP.DUST

ACGIH TLV: 10 MG/M3 NUISANCE

IRON

CAS: 65996-67-0

Fraction By Weight: < 5%

OSHA PEL 5 MG/M3 RESP.DUST

ACGIH TLV: 10 MG/M3 NUISANCE

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: < 5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1 - 3%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: 1 - 5%

OSHA PEL 15 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3;TDUST; 9293

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

IRON OXIDE

CAS: 65996-74-9

Fraction By Weight: < 0.5%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: < 0.5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

GRAPHITE, NATURAL

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: < 0.5%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9293

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES AND GASES CAN BE DANGEROUS TO
YOUR HEALTH. ARC RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK
CAN KILL. NOISE CAN DAMAGE HEARING.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:ACUTE:METALLIC
TASTE,NAUSEA,DIZZINESS,DRYNESS,IRRITATION OF EYES,NOSE AND THROAT.
CHRONIC:EXCESSIVE LEVELS MAY CAUSE SIDEROSIS (IRON DEPOSITS IN
LUNGS) AND AFFECT PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:AGGRAVATION OF EXISTING RESPIRATORY
OR ALLERGIC CONDITIONS.HIGHER LEVEL OF LUNG RELATED PROBLEMS AMONG
SMOKERS.

First Aid:REMOVE FROM EXPOSURE AND OBTAIN PROMPT MEDICAL ATTENTION. IF
NOT BREATHING,GIVE CPR/OXYGEN. EMPLOY FIRST AID TECHNIQUES
RECOMMENDED BY AMERICAN RED CROSS.

Extinguishing Media:NON-FLAMMABLE. USE EXTINGUISHING MEDIA APPROPIATE
FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:WELDING ARCS, SPARKS, ETC. MAY IGNITE
COMBUSTIBLE MATERIAL.

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
AND PLACE IN APPROPIATE DISPOSAL CONTAINER.

Handling and Storage Precautions:STORE IN DRY AREA. ELECTRODES EXPOSED
TO MOISTURE MAY EXPLODE VIOLENTLY IF USED. DRY MOIST RODS BY BAKING
AT 300F FOR TEN HOURS.
Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE
FUMES.MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES.AVOID ELECTRICAL
SHOCK BY MAINTAINING DRY WORK AREA. WELDING ARC CAN IGNITE
COMBUSTIBLES AND FLAMMABLES.

Respiratory Protection:FUME RESPIRATOR OR AIR SUPPLIED RESPIRATOR IN
CONFINED SPACES OR WHERE VENTILATION DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:HELMET OR FACE SHIELD WITH FILTER LENS.
Other Protective Equipment:SUBSTANTIAL DARK CLOTH,ARM
PROTECTOR,APRON,HAT AND SHOULDER PROTECTION. AIR SAMPLING TO
DETERMINE CORRECTIVE MEASURES.
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING,SMOKING OR
USING SANITARY FACILITIES.
Supplemental Safety and Health
NONE.

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:WELDING ROD.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:IRON OXIDE, COMPLEX OXIDES OF
MANGANESE, SILICON AND SODIUM, CARBON MONOXIDE, CARBON DIOXIDE,
OZONE, NITROGEN OXIDES

Waste Disposal Methods:CONSULT WITH YOUR LOCAL ENVIRONMENTAL
OFFICER.DISPOSE OF FUMES,FLUX OR WELD GRINDING RESIDUE FROM THE
WORK AREA OR FROM FILTERS IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.